Put a photo on a dot matrix display

Your photo rebuilt as a grid of small glowing lights on a dark board, like a stadium screen, a station sign or an old LED ticker.

Open the editor with this effect

What you get

Made with plain math, not a model

There is no generative model behind this look and nothing was trained on anyone's work. It is a short list of fixed steps running in your browser.

  1. Read the photo: Your photo is read pixel by pixel inside your browser. It is never uploaded, so nothing leaves your device.
  2. LED grid: The image is sampled on a fixed grid and each cell lights one round dot, brighter where the photo is brighter, with a soft glow around it.
  3. Same input, same pixels: Every step is fixed math with fixed seeds. Run it again tomorrow on the same photo and you get exactly the same image.

Station departure boards, stadium scoreboards, the ticker over a shop door. They are all built the same way, from a grid of small lights that each switch on, off or somewhere in between. Up close you see every dot. From a few steps back they melt into letters and pictures. Bitgrain rebuilds your own photo as one of those boards, with plain image maths and no AI.

How LED dot matrix displays work

Each light in the grid is one LED, or a tight cluster of red, green and blue LEDs for a full colour panel. A controller sets the brightness of every one many times a second.

Panels are described by their pitch, the distance between the centres of two neighbouring lights. A P10 panel has lights 10 millimetres apart, which is why big outdoor screens look so coarse up close.

Older signs used a single colour, very often amber or red, because single colour LEDs were cheaper and brighter. That amber glow is still what most people picture when they hear dot matrix.

The name also belongs to dot matrix printers, which strike paper through an inked ribbon with a column of tiny pins. That is a different look, closer to a coarse dither on paper.

What makes it read as a real sign

A dark board. LEDs emit light, so the gaps between them are black and the lights glow against them. A light background immediately looks like a halftone print instead.

Visible spacing. Each light needs a little dark space around it, or the grid turns into ordinary pixel art.

A soft glow. Real LEDs bloom a little into the dark around them, especially in photos taken at night.

Bold subjects. A display has very few lights compared with a photo, so faces in close up, big shapes and bright city lights survive the best.

Where it works

Music artwork, club and gig posters, event screens and title cards for videos.

Night photos with lit windows and street lights, which already look like a field of small glowing points.

Short text and logos. Set big, bold type in the studio, then run the whole design through the effect so the words light up too.

How to do it in Bitgrain

Open the editor from this page. The LED matrix look is already on the sample, with round amber lights on black. Drop in your own photo.

Change Size to set how far apart the lights sit. Larger gaps read from further away, like a stadium board.

Pick an LED type: round dots, square chips, RGB stripes or marquee bulbs. Set the Colour, or under Advanced choose From the photo for a full colour screen, and raise the Glow for a night time bloom.

Export PNG. For a classic square pixel version without glow, the Dot matrix filter is in the Filters list too.

Common questions

Is this a dot matrix printer effect?

No, it imitates LED dot matrix displays. For a printed dot look, try the halftone effect or a dither in black on paper.

Can I make it full colour?

Yes. Under Advanced in the LED matrix look, set Light colour to From the photo and each light takes the colour of its part of the picture.

Does it use AI?

No. The photo is sampled on a grid and each light is drawn from that sample, all in your browser. Nothing is uploaded.

Related tools