Hard black dots on white paper, the way a till printer burns a picture into heat sensitive paper, with the odd speck and streak. Worked out on your device, no AI.
Open the editor with this effect
There is no generative model behind this look and nothing was trained on anyone's work. It is a short list of fixed steps running in your browser.
A receipt printer has no ink. It presses heat sensitive paper against a row of tiny heating elements and darkens the coating dot by dot as the paper rolls past. Each dot is either black or not there at all, so any photo it prints has to be broken into a pattern of dots first. That gritty, high contrast look is what people mean by a thermal print, and Bitgrain makes it from your own photo with plain image maths, no AI.
Thermal paper is coated with a dye and a developer that react when heated. The print head is a single line of heating elements across the width of the paper, and it fires the ones it needs for each row as the paper feeds through.
Common receipt printers print at around 203 dots per inch, about 8 dots per millimetre, on rolls 58 or 80 millimetres wide. That is not much detail, which is part of the charm.
Because a dot can only be on or off, photos are dithered before printing. The software turns each shade of grey into a pattern of black dots and white gaps that the eye blends back together.
The same idea powered the Game Boy Printer and today's small pocket photo printers, which use thermal paper for little sticker prints.
Pure black and white. No greys at all, just dots. A soft grey photo with a paper colour on top does not read as thermal.
Harsh contrast. Thermal prints lose detail in the highlights and fill in the shadows. Atkinson dithering, the method from the early Macintosh, does something similar because it lets some of the tone fall away and keeps whites clean.
Small flaws. A worn or dirty heating element leaves a thin white line running down the whole print, and dust on the paper gives specks. A few of those sell the effect.
Fading. Thermal paper darkens with heat and fades with light and time, so an old receipt is often greyer and patchier than a fresh one.
Simple subjects with clear shapes, such as pets, faces, objects and illustrations. Fine detail gets lost in the dots.
Tall crops. A narrow vertical frame looks like it came off a roll, especially with a little white space above and below.
Receipt style posters, menus, event tickets and photo strips, where you set text in a mono font over the image in the studio.
Open the editor from this page. The sample is dithered with Atkinson in black on white, with dust and a faint streak on top. Drop in your own photo.
Use Brightness and Contrast in the Tone panel. More contrast gives the burnt in look of a fresh receipt, lower contrast a faded old one.
Change the detail to make the dots finer or chunkier. Chunkier dots feel like a cheap pocket printer.
Add Film dust from Effects for more specks, then export PNG.
Yes. The export is pure black and white, which is what thermal printers expect. Resize it to your printer's width in dots first, for example 384 dots for many 58 mm printers, so the pattern is not resampled.
Both work. Atkinson keeps the whites cleaner and the contrast higher, which looks closer to a receipt. You can switch methods in the Dither panel and compare.
Neither. The dithering and the specks are worked out in your browser and your photo stays on your device.