Thousands of tiny random marks build the picture, dense in the shadows and sparse in the light, like an old roughened print plate. Worked out from your photo, no AI.
Open the editor with this effect
There is no generative model behind this look and nothing was trained on anyone's work. It is a short list of fixed steps running in your browser.
Browse templates in this style
A mezzotint is a print with no lines in it at all. The whole plate is roughened until it would print solid black, and the picture is pulled out of the dark by smoothing the light back in. On screen, the name has come to mean a gritty texture of tiny random marks that builds a picture out of noise. Bitgrain makes that texture from your own photo with plain image maths, no AI and no upload.
The printmaker starts with a copper plate and rocks a curved, toothed blade called a rocker across it, again and again in every direction, until the whole surface is covered in tiny pits and burrs.
Inked as it is, that plate prints a deep, velvety black. The artist then works from dark to light, scraping and burnishing the burr flat wherever the picture should be paler, so less ink is held there.
The process was invented in the seventeenth century and became so popular for copying portrait paintings in eighteenth century England that it was known abroad as the English manner.
Because tone comes from a rough surface rather than from lines or dots in a grid, a close look shows a soft, grainy scatter. That grain is what the digital mezzotint filters borrowed.
Random marks, not a pattern. A grid of dots reads as halftone, and ruled lines read as engraving. Mezzotint needs a scatter with no visible order.
Tone from how many marks survive. In the shadows almost every mark prints, in the light most of them drop away, so the picture appears as the density changes.
Enough of the photo left to recognise. Push the grit too hard and a face turns into static. A little of the original tone underneath keeps it readable.
The right mark for the subject. Fine dots suit faces, coarse dots and strokes suit posters, and lines give a scratchier, more etched feel.
Portraits with soft, even light look rich and grainy, close to an old print.
Bright, colourful photos keep their colour through the texture, which gives a noisy, printed feel that works on posters and album covers.
Very flat or very dark photos lose detail. Lift the brightness first so there is a range of tones for the marks to work with.
Open the editor from this page. The Mezzotint style is already on the sample. Drop in your own photo.
Pick a Texture: Grain, Fine dots, Coarse dots, Lines or Strokes. Then set Density. Higher density prints more marks, so the picture gets darker and heavier.
Under Colour, keep Photo colours, push them with Saturated, or choose Black and white for a classic print.
Under Advanced, Grit sets how hard the marks cut. Lower it to keep more of the photo underneath. Contrast, Brightness and Invert are there too. Export PNG when you are happy.
It is the same idea, a picture built from random marks, with a few more choices of mark and a colour option. It runs in your browser, so there is nothing to install.
Stipple places clean, separate dots on paper, like a pen drawing. Mezzotint is rougher and keeps the photo's colour and tone underneath the marks, so it reads as a gritty print.
No. Every mark is placed by a fixed pattern and kept or dropped by the brightness of your photo, in your browser. Nothing is generated and nothing is uploaded.